SEALXTREME 泄漏修复套件
Home / Products / C-SMARTSEAL / SEALXTREME Leak Repair Kit
SEALXTREME 泄漏修复套件
SEALXTREME 泄漏修复套件可在 30 分钟内在管道介质无压排放时密封管道上发现的泄漏。 SEALXTREME 泄漏修复套件可承受的最大固化后压力约为 27 bar (400 psi)。这是一种特殊配制的缠绕修复套件，经久耐用且具有高工业强度，可密封管道泄漏，具有成本效益。
新加坡制造
特征
-
固化后可承受高达 27 bar (400 psi) 的压力和高达 120 °C (248 °F) 的温度
-
在不到 30 分钟内修复泄漏
-
手工应用
-
适用于金属和非金属管道
-
增强耐化学性
-
修复和延长管道寿命
-
环保，减少碳足迹
-
Withstand pressure up to 28 bar (406 psi) post cure
-
Withstand temperature up to 120 °C (248 °F) post cure
-
Fix leaks in less than 30 minutes
-
Hand-Applied
-
Works on both metal and non-metal pipes
-
Enhance chemical resistance
-
Repair and extend pipe life
-
Environmentally friendly, reduce carbon footprint
包装信息
ITEM CODE | SIZE | IMPA CODE | HS CODE |
|---|---|---|---|
SNLRK0206 | 50 mm x 1.8 m | 812173 | 39191099 |
SNLRK0309 | 75 mm x 2.7 m | 812452 | 39191099 |
SNLRK0412 | 100 mm x 3.6 m | 812174 | 39191099 |
最佳实践指南
PIPE DIAMETER (mm) | PIPE DIAMETER (inch) | KIT SIZE FOR PRESSURE UPTO 4 bar (50 psi) | QUANTITY FOR PRESSURE UPTO 4 bar (50 psi) | KIT SIZE FOR PRESSURE UPTO 10 bar (150 psi) | QUANTITY FOR PRESSURE UPTO 10 bar (150 psi) |
|---|---|---|---|---|---|
15 mm | ½ inch | 50 mm x 1.8 m | 1 | 50 mm x 1.8 m | 1 |
20 mm | ¾ inch | 50 mm x 1.8 m | 1 | 50 mm x 1.8 m | 1 |
25 mm | 1 inch | 50 mm x 1.8 m | 1 | 50 mm x 1.8 m | 2 |
32 mm | 1¼ inch | 50 mm x 1.8 m | 1 | 50 mm x 1.8 m | 3 |
40 mm | 1½ inch | 50 mm x 1.8 m | 2 | 50 mm x 1.8 m | 3 |
50 mm | 2 inch | 75 mm x 2.7 m | 1 | 75 mm x 2.7 m | 1 |
65 mm | 2½ inch | 75 mm x 2.7 m | 1 | 75 mm x 2.7 m | 2 |
80 mm | 3 inch | 75 mm x 2.7 m | 1 | 100 mm x 3.6 m | 2 |
100 mm | 4 inch | 75 mm x 2.7 m | 1 | 100 mm x 3.6 m | 3 |
125 mm | 5 inch | 100 mm x 3.6 m | 2 | 100 mm x 3.6 m | 3 |
150 mm | 6 inch | 100 mm x 3.6 m | 2 | 100 mm x 3.6 m | 4 |
200 mm | 8 inch | 100 mm x 3.6 m | 2 | 100 mm x 3.6 m | 5 |
250 mm | 10 inch | 100 mm x 3.6 m | 3 | 100 mm x 3.6 m | 6 |
300 mm | 12 inch | 100 mm x 3.6 m | 4 | 100 mm x 3.6 m | 8 |
350 mm | 14 inch | 100 mm x 3.6 m | 4 | 100 mm x 3.6 m | 8 |
400 mm | 16 inch | 100 mm x 3.6 m | 5 | 100 mm x 3.6 m | 9 |
450 mm | 18 inch | 100 mm x 3.6 m | 5 | 100 mm x 3.6 m | 9 |
对于 450 毫米（18 英寸）以上的尺寸，联系我们
技术数据
PARAMETER | VALUE |
|---|---|
Tensile Strength | 1655 bar (24000 psi) |
Lap Shear Strength | 62 bar (900 psi) |
Flexural Strength | 1103 bar (16000 psi) |
Application Temperature | 0 °C to 65 °C (32 °F to 149 °F) |
Dielectric Strength | 16000 Volts |
Hardness | 85 Shore D |
Service temperature | -50 °C to 120 °C (-58 °F to 248 °F) |
Design Pressure | 28 bar (406 psi) |
如何申请
-
安全第一，佩戴合适的防护装备。手套是必须的
-
揉捏环氧树脂棒，直到 80% 变硬
-
使用 80% 固化的环氧树脂棒密封泄漏
-
将玻璃纤维修复胶带浸入水中 5 秒钟
-
用玻璃纤维修复胶带加固修复区域
-
用水打磨玻璃纤维修补带表面，与管道平行方向摩擦
-
Safety first, wear appropriate protective gear. Gloves are a must
-
Knead the epoxy stick until 80% harden
-
Use the 80% cure epoxy stick to seal the leak location
-
Dip the fiberglass repair tape in water for 5 seconds
-
Reinforce repair area with fiberglass repair tape
-
Polish the surface of fiberglass repair tape with water and rub in parallel direction with the pipe
