SEALXTREME 泄漏修复套件
家/C-SMARTSEAL 修复·重建·解决 / Sealxtreme 泄漏修复套件
SEALXTREME 泄漏修复套件
SEALXTREME 泄漏修复套件可在 30 分钟内在管道介质无压排放时密封管道上发现的泄漏。 SEALXTREME 泄漏修复套件可承受的最大固化后压力约为 27 bar (400 psi)。这是一种特殊配制的缠绕修复套件，经久耐用且具有高工业强度，可密封管道泄漏，具有成本效益。
新加坡制造
Due to nature of production, please contact us to order this product. We'll notify the lead time & MOQ, if any.
特征
-
固化后可承受高达 27 bar (400 psi) 的压力和高达 120 °C (248 °F) 的温度
-
在不到 30 分钟内修复泄漏
-
手工应用
-
适用于金属和非金属管道
-
增强耐化学性
-
修复和延长管道寿命
-
环保，减少碳足迹
-
Surface must be clean and free from dust, oil or other
contaminations -
Sand painted surfaces
-
Puncture the inner seal, cut the nozzle and place it in
cartridge gun -
Apply the adhesive in zig zag pattern or continuous
wavy beads on a flat surface or on joists -
Always apply adhesive to the edges of all corners and
within in 5 minutes fit the surface together and press
firmly -
In case of heavy and large objects if necessary, clamp
or support (about 24 hours) -
Avoid using it for constant water immersion, ceiling
mirrors, or on plastics, polystyrene, and polyethylene
foams
如何申请
-
安全第一，佩戴合适的防护装备。手套是必须的
-
揉捏环氧树脂棒，直到 80% 变硬
-
使用 80% 固化的环氧树脂棒密封泄漏
-
将玻璃纤维修复胶带浸入水中 5 秒钟
-
用玻璃纤维修复胶带加固修复区域
-
用水打磨玻璃纤维修补带表面，与管道平行方向摩擦
-
Ensure the bonding surfaces are clean
-
Cut the tip of STICBOND® LIQUID NAILS to 5 mm
-
Apply bead along length of one bonding surface. For larger surfaces, apply every 400 mm
-
Position surfaces and press firmly together with a clamp for 30 minutes
PRO TIP: Clean any excess adhesive, using a cloth with adhesive remover
